PDF (Tiếng Việt)
| Download: 53
Working Languages
How to Cite
Dinh, C. H., & Hoang, T. T. (2013). Modeling work surface from measured
data of the Trimble S6 with reflectorless measurement mode. Journal of Geodesy and Cartography, (16), 54–58. https://doi.org/10.54491/jgac.2013.16.75
Most read articles by the same author(s)
- Thi Thuy Hoang, Cong Hoa Dinh, UAV - Base data for topographical mapping of vegetation covered areas , Journal of Geodesy and Cartography: No. 44 (2020)
- Thi Thuy Hoang, Improvement of accuracy of RTK-measured coordinates for large scale mapping , Journal of Geodesy and Cartography: No. 38 (2018)
- Cong Hoa Dinh, Editing topographical map and cadastral map , Journal of Geodesy and Cartography: No. 38 (2018)
- Quang Minh Nguyen, Thi Thu Huong Nguyen, Thi Thuy Hoang, Phu Hien La, Van Chuc Nguyen, Van Duong Do, Improvement of DEM accuracy using Hopfield Neural Network downscaling with additional point elevation data , Journal of Geodesy and Cartography: No. 56 (2023)
- Thi Thuy Hoang, Built program module to support the establishment of land-use planning maps from topographic and cadastral mapping data. , Journal of Geodesy and Cartography: No. 55 (2023)
- Thi Thuy Hoang, Solution for correcting elevation and coordinate measured by GNSS/CORS Technology when combined with traditional measurement method in large scale mapping , Journal of Geodesy and Cartography: No. 47 (2021)
- Cong Hoa Dinh, Thi Thuy Hoang, Van Lam Nguyen, Applications of information technology for tunnel surveying, design, and construction , Journal of Geodesy and Cartography: No. 22 (2014)
- Cong Hoa Dinh, Thi Thuy Hoang, Apply information technology in problem of the transform reference system of digital topographic map , Journal of Geodesy and Cartography: No. 31 (2017)